Treffer: 1-30 (von 151) nur vorrätige |
|
|
|
Art.Nr.: 29599 |
|
|
Art.Nr.: 29599 |
kompatibler Ersatz- O-Ring / Gummi Antriebsriemen, schwarz, für Lidar Sensor im Neato / Vorwerk Kobold Staubsaugroboter VR200 und VR300 LIDAR Gummiriemen Nitril NBR Riemen, Härte 70 / NBR 70 hardness nitrile belt Bitte Abbildungen beachten ! PASSEND FÜR / KOMPATIBEL MIT: Vorwerk Kobold VR-200 VR200 Vorwerk Kobold Folletto VR-300 Neato BotVac Connected D3 905-0321, D4 D401 D405,945-0343, D450, D5 D502 905-0386, D6 D602 D650 945-0345, D7 945-0296, D8 , D9 mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 11591 |
|
|
Art.Nr.: 11591 |
Ersatz- O-Ring / Gummi Antriebsriemen, schwarz, für Lidar Sensor im Neato Robotics und Vorwerk Kobold Staubsaugroboter LIDAR Gummiriemen 85x2mm Nitril NBR Riemen, Härte 70 / NBR 70 hardness nitrile belt Passender Motor: Artikel 80288 Bitte Abbildungen beachten ! PASSEND FÜR / KOMPATIBEL MIT: Neato Signature Pro Neato XV Serie: alle Neato Staubsauger aus der XV Serie, z.B. XV-21, XV-18 ( XV Signature ), XV Signature Pro Vorwerk Kobold VR-100 VR100 Vorwerk / Neato BotVac 70 / D70 / 75 / D75 / 80 / 85 / D80 / D85 mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 30058 |
|
|
Art.Nr.: 30058 |
Sharp IR Sensor 0A51SK / 0A51SK2, gebraucht, aus getestetem VR100 ausgebaut dieser Sensor ist als Absturzsensor ( Cliff Sensor ) in vielen Roboterstaubsaugern ( z.B Neato / Vorwerk ) verbaut und verhindert den Absturz an Treppen. Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: BotVac Serie / VR100 / VR200 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 29028 |
|
|
Art.Nr.: 29028 |
Magnetsensor Platine, für Neato Botvac Connected D Serie aus fabrikneuem Neato Botvac Connected D7 ausgebaut / pulled from new BotVac D7 Neato P/N 290-1008 Huey Mag Sensor Rev 4 / mag slug 16.5cm Kabel, schwarz/grün/orange, 3pin Stecker Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac Connected D3, D5, D7, D9 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 66482 |
|
|
Art.Nr.: 66482 |
Zahnriemen-Abdeckung, neu, für Neato Bot Vac Serie Hauptbürstenantrieb. Getriebe / Bürstenaufnahme, ohne Zahnriemen, neu mit Sechskant Ritzel Zahnrad ) auf dieses wird die Hauptbürste aufgesteckt ) Gehäuse mit Bürstengetriebe für Zahnriemen ( 300-0214-XX + 301-0002-XX + Ritzel / Zahnrad zum Aufstecken der Bürste ) Bitte Abbildungen beachten ! Passender Zahnriemen: Artikel 28525 PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac 70e, 75, 80, D Serie, D75, D85 und andere Modelle Neato BotVac Connected D3 / D5 / D7 / D9 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 40072 |
|
|
Art.Nr.: 40072 |
Microschalter DF-03 für Neato Bot Vac D Serie aus fabrikneuem Neato Botvac ausgebaut / pulled from new BotVac D Connected Sensor für Radmodul Kabellänge braun/grau ca 9cm Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac D3 / D4 / D5 / D6 / D7 Connected Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 56215 |
|
|
Art.Nr.: 56215 |
Magnetsensor für Neato Botvac D85 und andere gebraucht, aus einwandfreiem Neato Botvac ausgebaut / pulled from tested BotVac D85 Neato P/N 290-0041 slide mag sensor board / mag slug Kabel rot/grün/schwarz ca 5cm Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac D65 / D70 / D75 / D80 / D85 Neato BotVac Connected 905-0249, 945-0181 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 11968 |
|
|
Art.Nr.: 11968 |
Komplettes Antriebsmodul, rechts oder links passend, für Neato Bot Vac D Connected Serie 1x Radmodul ( Rad mit Getriebe und Motor ), passend für beide Seiten, für Neato Botvac D Connected Serie ( new wheel motor with gearhead ) Neues original Neato Ersatzteil PASSEND FÜR / KOMPATIBEL MIT: Neato Robotics BotVac Connected D3 / D4 D450 / D5 D502 / D6 D602 D650 / D7 Bitte Abbildungen beachten. Weitere Neato/Vorwerk Ersatzteile auf Anfrage: email mailto:neato@ep-mediastore-ab.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 40095 |
|
|
Art.Nr.: 40095 |
Dropsensor Platine, für Neato Botvac Connected Serie Der Drop-Sensor, auch Cliff oder Absturzsensor verhindert dass der Roboter nicht die Treppe runterfährt und Kanten nicht überfährt. aus fabrikneuem Neato Botvac Connected ausgebaut / pulled from new BotVac Neato P/N 290-1023 Drp Sensor Louie Drop Sensor Rev 2 Board PCB Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac Connected D3, D4 D450, D5, D6, D7, D9 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 44460 |
|
|
Art.Nr.: 44460 |
Ersatzmotor für Neato Bot Vac Connected D3 / D5 / D7 / D9 Serie, wird benötigt wenn der Lidar Sensor nicht dreht oder nicht mehr in der richtigen Drehzahl dreht LDS Lidar Distance Sensor RPS Motor, mit ca 14.5cm Anschlusskabel und 2pol Stecker Maße des Motors ( Durchmesser x Höhe ohne Welle ): 24.4x12.4mm, Max-Höhe mit Welle 19.4mm behebt Fehler "unable to return to base", "unable to navigate" Auch passend für BotVac Connected PartNo. 905-0249, hier muss allerdings das Kabel verlängert bzw. getauscht werden, passende Verlängerung ist Artikel 30766 Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato Botvac Connected D3, D5, D7, D9 Serie Neato BotVac Connected 905-0249 ( Kabel muss getauscht werden ) mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 81003 |
|
|
Art.Nr.: 81003 |
Neue Saugeinheit für Botvac Connected Serie 14V Gebläse Saug-Motor für Neato BotVac Connected D Serie neu, aus fabrikneuem Bot Vac D Connected Vacuum Impeller, 25mm Gehäusedicke Delta BCB1012GJ-01 DC14.4V 3.45A B5D 4pol Kabel mit 4pol Buchse, ca 60cm Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac Connected Serie, z.B. D3 / D4 / D5 D502 / D6 D602 / D7 / D8 / D9 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 64015 |
|
|
Art.Nr.: 64015 |
Bot Vac Doppel-Bumper Sensor mit Feder und Kappe, für linke oder rechte Seite Doppelsensor für Stoßstange Neato P/N 290-0056 Huey, mit Plastikkappen aus fabrikneuem Neato Connected D ausgebaut / pulled from new robot Slide bump switch Rev.5 / left or right Kabellänge blau/gelb ohne Stecker je ca. 20cm 4pol Stecker ( JST Buchse ) Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato Botvac Connected D3, D5, D7, D9 für Botvac 85 sollten die VR100 Stoßsensoren passen ! Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 66483 |
|
|
Art.Nr.: 66483 |
Lautsprecher, aus fabrikneuem Botvac Connected D7, für Botvac D3 / D4 / D5 / D6 / D7 8 Ohm, 1.5 Watt Speaker, Durchmesser 26.1mm Kabel gelb/blau ca 6cm, 2pin Stecker Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato Botvac Connected D3, D4 D450, D5, D6, D7, Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 20126 |
|
|
Art.Nr.: 20126 |
Internes JST Kabel für Neato Bot Vac D Connected Serie 8pol JST PH 2.0 Pitch Buchsenleiste auf 8 polige PH2.0 Buchse, ca 33.5cm Kabellänge, Kabelfarbe gelb/grün, 1:1 verdrahtet Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac Connected D3 / D5 / D7 / D9 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 32490 |
|
|
Art.Nr.: 32490 |
3 Plastikabdeckungen für Botvac Huey Dropsensor Platine, für Neato Botvac Connected Serie, DRP Rahmen DRP Cover Halterung, aus fabrikneuem Neato Botvac Connected ausgebaut / pulled from new BotVac Neato P/N 300-0329, 300-0330 für Huey Drop Sensor Rev 10 Board PCB Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac Connected D3, D4, D5, D6, D7, D9 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 46550 |
|
|
Art.Nr.: 46550 |
rechter seitlicher IR Sensor mit Gehäuse für Neato BotVac Serie getestete Gebrauchtware, neuwertig, aus getestetem BotVac - IR-Sensor rechts, schwarzes Gehäuse 300-209-XX mit Plastikscheibe und Sensor SHARP 0A51SK und 3pol Kabel Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac Serie, z.B. 80 / 85 / D75 / D80 / D85 Neato BotVac Connected 905-0249, 945-0181 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 62544 |
|
|
Art.Nr.: 62544 |
Farbdisplay für Neato BotVac Serie gebraucht, getestet, aus einwandfreiem Neato Botvac ausgebaut / pulled from tested BotVac 290-1001 Rev 2 PCB slide premium UI board Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac Connected 905-0249, 945-0181 Neato BotVac 65 / 70e / 75 / 85 Neato BotVac D75 / D80 / D85 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 35666 |
|
|
Art.Nr.: 35666 |
Original Neato Ultra-Leistungsfilter, Ersatzfilter einzeln, für Neato Reinigungs-Roboter 1 Filter, schwarz, für BotVac D Connected etc P/N: Neato 905-0263 905-0263-3 Maße: 200 x 55 mm Bitte Abbildungen beachten ! PASSEND FÜR / KOMPATIBEL MIT: Neato Botvac / Botvac D Serie / BotVac Connected Serie, z.B. D75 D85 70e 85 80, Neato Botvac 905-0079, Botvac 65, Botvac 70, Botvac 70e, Botvac 75, Botvac 80, Botvac 85, Botvac D 905-0285, Botvac D 905-0306, Botvac D65, Botvac D70, Botvac D75, Botvac D80, Botvac D85, Botvac Connected 905-0249, Botvac D3 Connected, Botvac D3+ Connected, Botvac D301 Connected, Botvac D303 Connected, Botvac D5 Connected (905-0358), Botvac D5+ Connected, Botvac D502 Connected, Botvac D503 Connected, Botvac D6 D602 D650, Botvac D7 Connected, Botvac D701 Connected (945-0296), mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 33002 |
|
|
Art.Nr.: 33002 |
Saug-Motor Gebläse für Neato BotVac Serie / Vacuum Impeller getestete Gebrauchtware, aus BotVac D75/85 Vacuum Impeller Delta BCB1012UH-A DC12V 3.45A A01 4pol Kabel mit 4pol Buchse, ca 35cm Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac Serie, z.B. 80 / 85 / D75 / D80 / D85 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 38564 |
|
|
Art.Nr.: 38564 |
LDS RT Interface Platine 290-1024 REV1 Board für Bot Vac Connected D Serie Lidar Sensor Neato P/N: 290-1024 grün mit Anschlüssen für LDS motor, R-Wheel, R-LIMIT, Motor, R-SPKR etc Neu Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac Connected D3 / D4 / D5 / D6 / D7 / D9 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 63544 |
|
|
Art.Nr.: 63544 |
2 Radfedern für Radmodul 2 Federn , sitzen zwischen Gehäuse und Antriebsmodulen Länge ausgefedert ca 38mm, Ausßendurchmesser ca 9.5mm Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato Botvac 70, 70E, 75, D75, 75E, 85, 85E, D85, Connected Neato Botvac Connected D3, D5, D7 Neato BotVac Connected 905-0249, 945-0181 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 80153 |
|
|
Art.Nr.: 80153 |
Microschalter DF-03 für Neato Bot Vac Serie aus fabrikneuem Neato Botvac ausgebaut / pulled from new BotVac Sensor für Radmodul DF03 Kabellänge braun/grau ca 29cm Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac 70 / 75 / 80 / 85 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 30583 |
|
|
Art.Nr.: 30583 |
gebrauchte Dockingstation - Gehäuse, schwarz, mit Netzteil ohne Netzkabel gebrauchte Basisstation / Dockingstation ( Ladestation mit internem Netzteil ), wie Abbildung Eingang 100-240VAC Ausgang 19V 40 Watt DC Neato / Vorwerk D3 / D4 / D5 / D6 / D7 Homebase, with internal Powersupply Neato P/N 905-0342 / 945-0260 / 905-0551 Gebrauchtware passendes Netzkabel ( nicht im Lieferumfang ) : Artikel 21123 Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato Botvac Connected D Serie: alle, z.B D3 / D4 / D5 D502 / D6 D602 D650 / D7 ERSETZT / PASSENDE TEILENUMMERN: Neato 905-0342 / 905-0551 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 46455 |
|
|
Art.Nr.: 46455 |
Lautsprecher, gebraucht, für Botvac 8 Ohm, 1.5 Watt Speaker, mit Halter grau oder schwarz Kabel blau/gelb, ca 31cm Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato Botvac 70, 70E, 75, D75, 75E, 85, 85E, D75 / D85, Connected Neato BotVac Connected 905-0249, 945-0181 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 28525 |
|
|
Art.Nr.: 28525 |
Zahnriemen, neu, für Bürstenantrieb für Neato Bot Vac Serie Bürsten-Antriebsriemen / Belt Pioneer Rubber Belt 171-3M , 57 Zähne Bitte Abbildungen beachten ! PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac 70e, 75, 80, D Serie, D75, D85 und andere Modelle Neato BotVac Connected D3 / D4 D450 / D5 / D6 / D7 / D9 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 61430 |
|
|
Art.Nr.: 61430 |
Dockingstation - Gehäuse, schwarz, mit Netzteil Neato Charge Base for Botvac D7, D6, D4, D5, D3. Ihr Neato Saugroboter kann jetzt überall in Ihrem Haus eine zweite Ladestation nutzen - Diese Original Neato Ladestation ist kompatibel mit der Botvac D3, D4, D5, D6 und D7 Serie. Basisstation / Dockingstation ( Ladestation mit internem Netzteil ), inklusive Dock-Kontakten, wie Abbildung, Eingang 100-240VAC, Ausgang 19V 40 Watt DC Neato / Vorwerk D3 / D5 / D7 / D9 Homebase, with internal Powersupply Neato P/N 905-0342 945-0260 Neuware passendes Netzkabel ( nicht im Lieferumfang ) : Artikel 21123 Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato Botvac Connected D Serie: alle, z.B D3 / / D4 / D5 D502 / D6 / D7 ERSETZT / PASSENDE TEILENUMMERN: Neato 905-0342 Weitere mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 30588 |
|
|
Art.Nr.: 30588 |
gebrauchter Saug-Motor für Neato BotVac Connected D Serie Vacuum Impeller Gebläse, 25mm Gehäusedicke Delta BCB1012GJ-01 DC14.4V 3.45A B5D 4pol Kabel mit 4pol Buchse, ca 60cm Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac Connected Serie, z.B. D3 / D5 / D7 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 30406 |
|
|
Art.Nr.: 30406 |
Untere Abdeckung für Batteriefach Neato Botvac D85 schwarz, aus fabrikneuem Neato Botvac D Connected ausgebaut / pulled from new BotVac Neato P/N 300-0365 oder 300-0308 mit 2 Schrauben Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac Connected D3 / D5 / D7 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.demehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 79208 |
|
|
Art.Nr.: 79208 |
Verbindungskabel Mainboard zum Display Botvac D85 und andere (s.u.) Kabellänge ca 30cm, 12x2pin Buchsenleiste beidseitig Bitte Abbildungen beachten ! PASSEND FÜR / KOMPATIBEL MIT: Neato BotVac D75 / D80 / D85 Neato BotVac Connected 905-0249, 945-0181 mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 58822 |
|
|
Art.Nr.: 58822 |
kompatibler Ultra-Leistungsfilter, einzeln, für Neato Reinigungs-Roboter 1 Filter, schwarz, für BotVac D Connected etc 100% kompatibel zu Neato 905-0263 Maße: 200 x 55 mm Bitte Abbildungen beachten ! PASSEND FÜR / KOMPATIBEL MIT: Neato Botvac / Botvac D Serie / BotVac Connected Serie, z.B. D75 D85 70e 85 80, Neato Botvac 905-0079, Botvac 65, Botvac 70, Botvac 70e, Botvac 75, Botvac 80, Botvac 85, Botvac D 905-0285, Botvac D 905-0306, Botvac D65, Botvac D70, Botvac D75, Botvac D80, Botvac D85, Botvac Connected 905-0249, Botvac D3 Connected, Botvac D3+ Connected, Botvac D301 Connected, Botvac D303 Connected, Botvac D5 Connected (905-0358), Botvac D5+ Connected, Botvac D502 Connected, Botvac D503 Connected, Botvac D7 Connected, Botvac D701 Connected (945-0296), Botvac D703 Connected (945-0284), mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|