angezeigte Produkte: 1-30 (von 139) nur vorrätige |
|
|
|
Art.Nr.: 11591 |
|
|
Art.Nr.: 11591 |
Ersatz- O-Ring / Antriebsriemen, schwarz, für Lidar Sensor im Neato Robotics und Vorwerk Kobold Staubsaugroboter * LIDAR Gummiriemen 85x2mm Nitril NBR Riemen, Härte 70 / NBR 70 hardness nitrile belt Passender Motor: Artikel #80288 Bitte Abbildungen beachten ! PASSEND FÜR / KOMPATIBEL MIT: * Neato Signature Pro * Neato XV Serie: alle Neato Staubsauger aus der XV Serie, z.B. XV-21, XV-18 ( XV Signature ), XV Signature Pro * Vorwerk Kobold VR-100 VR100 * Vorwerk / Neato BotVac 70 / D70 / 75 / D75 / 80 / 85 / D80 / D85 mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 30058 |
|
|
Art.Nr.: 30058 |
Sharp IR Sensor 0A51SK / 0A51SK2, gebraucht, aus getestetem VR100 ausgebaut * dieser Sensor ist als Absturzsensor ( Cliff Sensor ) in vielen Roboterstaubsaugern ( z.B Neato / Vorwerk ) verbaut und verhindert den Absturz an Treppen. Bitte Abbildungen beachten. * BotVac Serie / VR100 / VR200 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 56215 |
|
|
Art.Nr.: 56215 |
Magnetsensor für Neato Botvac D85 und andere * gebraucht, aus einwandfreiem Neato Botvac ausgebaut / pulled from tested BotVac D85 * Neato P/N 290-0041 * slide mag sensor board / mag slug * Kabel rot/grün/schwarz ca 5cm Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac D65 / D70 / D75 / D80 / D85 * Neato BotVac Connected 905-0249, 945-0181 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 64015 |
|
|
Art.Nr.: 64015 |
Bot Vac Doppel-Bumper Sensor mit Feder * Doppelsensor für Stoßstange Neato P/N 290-0056 Huey * aus fabrikneuem Neato Connected D ausgebaut / pulled from new robot * Slide bump switch Rev.5 * Kabellänge blau/gelb ohne Stecker je ca. 20cm * 4pol Stecker ( JST Buchse ) Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato Botvac Connected D3, D5, D7, D9 für Botvac 85 sollten die VR100 Stoßsensoren passen ! Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 80153 |
|
|
Art.Nr.: 80153 |
Microschalter DF-03 für Neato Bot Vac Serie * aus fabrikneuem Neato Botvac ausgebaut / pulled from new BotVac * Sensor für Radmodul * DF03 Kabellänge braun/grau ca 29cm Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac 70 / 75 / 80 / 85 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 40072 |
|
|
Art.Nr.: 40072 |
Microschalter DF-03 für Neato Bot Vac D Serie * aus fabrikneuem Neato Botvac ausgebaut / pulled from new BotVac D Connected * Sensor für Radmodul * Kabellänge braun/grau ca 9cm Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac D3 / D5 / D7 / D9 Connected Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 30055 |
|
|
Art.Nr.: 30055 |
kompatibler Ersatz Mikro Hepafilter für Neato Reinigungs-Roboter * 1 Ersatzfilter lila, für BotVac * ersetzt P/N: Neato 945-0214, 905-0127 * Maße : 20x5.5cm Bitte Abbildungen beachten ! PASSEND FÜR / KOMPATIBEL MIT: * Neato Botvac / Botvac D Serie, z.B. D75 D85 70e 85 80, Neato Botvac 905-0079, Botvac 65, Botvac 70, Botvac 70e, Botvac 75 905-0079, Botvac 80, Botvac 85, Botvac D 905-0285, Botvac D 905-0306, Botvac D65, Botvac D70, Botvac D75, Botvac D80, Botvac D85, Botvac Connected 905-0249, Botvac D3 Connected, Botvac D3+ Connected, Botvac D301 Connected, Botvac D303 Connected, Botvac D5 Connected (905-0358), Botvac D5+ Connected, Botvac D502 Connected, Botvac D503 Connected, Botvac D7 Connected, Botvac D701 Connected (945-0296), Botvac D703 Connected (945-0284), Botvac D705 Connected mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 35666 |
|
|
Art.Nr.: 35666 |
Original Neato Ultra-Leistungsfilter, Ersatzfilter einzeln, für Neato Reinigungs-Roboter * 1 Filter, schwarz, für BotVac D Connected etc * P/N: Neato 905-0263 905-0263-3 * Maße: 200 x 55 mm Bitte Abbildungen beachten ! PASSEND FÜR / KOMPATIBEL MIT: * Neato Botvac / Botvac D Serie / BotVac Connected Serie, z.B. D75 D85 70e 85 80, Neato Botvac 905-0079, Botvac 65, Botvac 70, Botvac 70e, Botvac 75, Botvac 80, Botvac 85, Botvac D 905-0285, Botvac D 905-0306, Botvac D65, Botvac D70, Botvac D75, Botvac D80, Botvac D85, Botvac Connected 905-0249, Botvac D3 Connected, Botvac D3+ Connected, Botvac D301 Connected, Botvac D303 Connected, Botvac D5 Connected (905-0358), Botvac D5+ Connected, Botvac D502 Connected, Botvac D503 Connected, Botvac D6 D602 D650, Botvac D7 Connected, Botvac D701 Connected mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 62544 |
|
|
Art.Nr.: 62544 |
Farbdisplay für Neato BotVac Serie - gebraucht, getestet, aus einwandfreiem Neato Botvac ausgebaut / pulled from tested BotVac * 290-1001 Rev 2 PCB slide premium UI board Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac Connected 905-0249, 945-0181 * Neato BotVac 65 / 70e / 75 / 85 * Neato BotVac D75 / D80 / D85 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 80501 |
|
|
Art.Nr.: 80501 |
Original Ladestation Netzteil für Neato / Vorwerk Reinigungs-Roboter Dock * Modell: TPi GTSA-240200TI Homebase Power supply * Eingang: 100-240V AC * Ausgang: 24V 2A DC 48 Watt * passend in Docking-Station Neato PN 910-0122 / 910-0097 ,Maße des Netzteils: 5 x 11,3 x 3,2 cm PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac / Signature Pro * Neato 945-0005 205-0001 945-0024 945-0007 * Neatp XV Serie: XV-11, XV-12, XV-14, XV-15, XV-21 Signature Pro, XV-18 ( XV Signature ), XV-25 * Vorwerk Kobold VR100 ( 1. Generation Binky mit 2A, NICHT FÜR V2 (2.5A CRUZ) GEEIGNET => ARTIKEL #80502 ERSETZT / PASSENDE TEILENUMMERN: * Neato TPi Model GTSA-240200TI, GTSA-240167TI ( 24V 1.67A) ACHTUNG: Lieferung ohne Netzkabel. Passendes Netzkabel: Artikel #21123, bitte bei Bedarf mitbestellen. ------------------------- mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 44460 |
|
|
Art.Nr.: 44460 |
Ersatzmotor für Neato Bot Vac Connected D3 / D5 / D7 / D9 Serie, wird benötigt wenn der Lidar Sensor nicht dreht oder nicht mehr in der richtigen Drehzahl dreht * LDS Lidar Distance Sensor RPS Motor, mit ca 14.5cm Anschlusskabel und 2pol Stecker * Maße des Motors ( Durchmesser x Höhe ohne Welle ): 24.4x12.4mm, Max-Höhe mit Welle 19.4mm * behebt Fehler "unable to return to base", "unable to navigate" * AUCH PASSEND FÜR BOTVAC CONNECTED PARTNO. 905-0249, HIER MUSS ALLERDINGS DAS KABEL VERLÄNGERT BZW. GETAUSCHT WERDEN, PASSENDE VERLÄNGERUNG IST ARTIKEL #30766 Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato Botvac Connected D3, D5, D7, D9 Serie * Neato BotVac Connected 905-0249 ( KABEL MUSS GETAUSCHT WERDEN ) mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 46550 |
|
|
Art.Nr.: 46550 |
rechter seitlicher IR Sensor mit Gehäuse für Neato BotVac Serie * getestete Gebrauchtware, neuwertig, aus getestetem BotVac - IR-Sensor rechts, schwarzes Gehäuse 300-209-XX mit Plastikscheibe und Sensor SHARP 0A51SK und 3pol Kabel Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac Serie, z.B. 80 / 85 / D75 / D80 / D85 * Neato BotVac Connected 905-0249, 945-0181 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 29028 |
|
|
Art.Nr.: 29028 |
Magnetsensor Platine, für Neato Botvac Connected D Serie * aus fabrikneuem Neato Botvac Connected D7 ausgebaut / pulled from new BotVac D7 * Neato P/N 290-1008 * Huey Mag Sensor Rev 4 / mag slug * 16.5cm Kabel, schwarz/grün/orange, 3pin Stecker Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac Connected D3, D5, D7, D9 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 20126 |
|
|
Art.Nr.: 20126 |
Internes Kabel für Neato Bot Vac D Connected Serie * 8pol Buchsenleiste auf 8 polige Buchse, ca 33.5cm Kabellänge, Kabelfarbe gelb/grün Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac Connected D3 / D5 / D7 / D9 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 33002 |
|
|
Art.Nr.: 33002 |
Saug-Motor für Neato BotVac Serie / Vacuum Impeller * getestete Gebrauchtware, aus BotVac D75/85 * Vacuum Impeller * Delta BCB1012UH-A DC12V 3.45A A01 * 4pol Kabel mit 4pol Buchse, ca 35cm * Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac Serie, z.B. 80 / 85 / D75 / D80 / D85 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 78500 |
|
|
Art.Nr.: 78500 |
kompatibler Hepafilter für Neato / Vorwerk Reinigungs-Roboter Bitte Abbildungen beachten ! PASSEND FÜR / KOMPATIBEL MIT: * Neato Signature Pro * Neato XV Serie: XV-21, XV-18 ( XV Signature ) * Vorwerk: Kobold VR100 ERSETZT / PASSENDE TEILENUMMERN: * 945-0002, 905-0154 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 10657 |
|
|
Art.Nr.: 10657 |
Bürsten-Abdeckung mit Rollen für Neato Botvac D85 / brush cage mit kleinen Bodenrollen * gebraucht, aus einwandfreiem Neato Botvac ausgebaut / pulled from tested BotVac D85 * mit Rollen ( 2x kleine Bodenrolle ) * * Neato PN 300-0322-XX / 300-0230-xx / 300-0327-xx Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac 70 70e / 80 / 85 / D70 / D75 / D80 / D85 * Neato BotVac Connected 905-0249, 945-0181 * Neato BotVac Connected D3 / D4 / D5 D502 / D6 / D7 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 26362 |
|
|
Art.Nr.: 26362 |
gebrauchte Bürste für Neato Botvac D Serie ( Kombibürste mit Klopf und Bürstenlamellen ) * gebraucht, getestet, aus gebrauchtem Neato Botvac ausgebaut / pulled from tested BotVac D * Neato main brush ( used condition ) Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato Botvac Connected 905-0249 * Neato BotVac D3 D4 D450 D5 D6 D7 Connected D60 D65 D70 D75 D80 D85 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 15039 |
|
|
Art.Nr.: 15039 |
Haupt-Bürstenmotor für Neato Bot Vac Serie * 14.4V DC 905-0460 * neuer Ersatzmotor mit Encoder und Kabel * Neato main brush motor 905-0460 with Encoder 290-0044 Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac D65 / D75 / D85 etc * Neato BotVac Connected D3 / D5 / D7 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 46455 |
|
|
Art.Nr.: 46455 |
Lautsprecher, gebraucht, für Botvac * 8 Ohm, 1.5 Watt Speaker, mit Halter grau oder schwarz * Kabel blau/gelb, ca 31cm Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato Botvac 70, 70E, 75, D75, 75E, 85, 85E, D75 / D85, Connected * Neato BotVac Connected 905-0249, 945-0181 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 79208 |
|
|
Art.Nr.: 79208 |
Verbindungskabel Mainboard zum Display Botvac D85 und andere (s.u.) * Kabellänge ca 30cm, 12x2pin Buchsenleiste beidseitig Bitte Abbildungen beachten ! PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac D75 / D80 / D85 * Neato BotVac Connected 905-0249, 945-0181 mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 66483 |
|
|
Art.Nr.: 66483 |
Lautsprecher, aus fabrikneuem Botvac Connected D7, für Botvac D3 / D4 / D5 / D6 / D7 / D9 * 8 Ohm, 1.5 Watt Speaker, Durchmesser 26.1mm * Kabel gelb/blau ca 6cm, 2pin Stecker Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato Botvac Connected D3, D4 D450, D5, D6, D7, D8, D9 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 63544 |
|
|
Art.Nr.: 63544 |
2 Radfedern für Radmodul * 2 Federn , sitzen zwischen Gehäuse und Antriebsmodulen * Länge ausgefedert ca 38mm, Ausßendurchmesser ca 9.5mm Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato Botvac 70, 70E, 75, D75, 75E, 85, 85E, D85, Connected * Neato Botvac Connected D3, D5, D7 * Neato BotVac Connected 905-0249, 945-0181 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 29561 |
|
|
Art.Nr.: 29561 |
Dockingstation - Gehäuse, schwarz, inklusive Netzteil * Basisstation / Dockingstation ( Ladesation mit internem Netzteil ), inklusive Dock-Kontakten, wie Abbildung * Neato / Vorwerk D85 Homebase, with internal Powersupply * Neato P/N 905-0310 / 905-0262 * Input / Eingang 100-240VAC 50-60HZ 45W 0.4-0.8A * Output / Ausgang 18VDC 36W 2.0A backfeed protected * getestete Gebrauchtware Lieferung ohne Netzkabel, passendes "Mickymaus" Netzkabel: Artikel #21123 Passt NICHT für neue Connected D Serie => Connected D Dock ist Artikel #30583 ! Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac Connected 945-0181 905-0249 * Neato Bovac Serie: alle, z.B. 65 / 70e / 75 / 80 / 85 * Neato Botvac D Serie: alle, z.B D65 / D70 / D80 / D85 ERSETZT / PASSENDE TEILENUMMERN: mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 40063 |
|
|
Art.Nr.: 40063 |
Haupt-Bürstenmotor für Neato Botvac 12V * gebraucht, getestet, aus einwandfreiem Neato Botvac ausgebaut / pulled from tested BotVac D85 * Chengfang Motor H29-5HA006-RoHS 12VDC 171H53 * mit Getriebe ( 300-0214-XX + 301-0002-XX + Zahnrad + Zahnriemen Pioneer 171-3M * Neato main brush motor with Encoder 290-0044 12V DC Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac D65 / D75 / D85 etc * Neato BotVac Connected D3 / D5 / D7 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 81003 |
|
|
Art.Nr.: 81003 |
14V Saug-Motor für Neato BotVac Connected D Serie * neu, aus fabrikneuem Bot Vac D Connected * Vacuum Impeller, 25mm Gehäusedicke * Delta BCB1012GJ-01 DC14.4V 3.45A B5D * 4pol Kabel mit 4pol Buchse, ca 60cm * Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac Connected Serie, z.B. D3 / D4 / D5 D502 / D6 D602 / D7 / D8 / D9 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 30406 |
|
|
Art.Nr.: 30406 |
Untere Abdeckung für Batteriefach Neato Botvac D85 * schwarz, aus fabrikneuem Neato Botvac D Connected ausgebaut / pulled from new BotVac * Neato P/N 300-0365 oder 300-0308 * mit 2 Schrauben Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac Connected D3 / D5 / D7 Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@pc-mediastore.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 48155 |
|
|
Art.Nr.: 48155 |
Bumper Sensor mit Feder * Neato P/N 290-0056 Huey, mit Kappe * aus Neato Bot Vac ausgebaut / pulled from BotVac Robot * Slide bump switch Rev.5 * Kabellänge ohne Stecker ca. 85mm * 2poliger Stecker Bitte Abbildungen beachten. PASSEND FÜR / KOMPATIBEL MIT: * Neato Botvac 70, 70E, 75, D75, 75E, D80, 85E, D85, Connected * Neato Botvac Connected D3, D4, D5, D6, D7 * Neato BotVac Connected 905-0249, 945-0181 für Botvac 85 sollten die VR100 Stoßsensoren passen ! Weitere Neato Ersatzteile auf Anfrage: mailto:neato-ersatzteile@ep-mediastore-ab.de mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 29599 |
|
|
Art.Nr.: 29599 |
kompatibler Ersatz- O-Ring / Antriebsriemen, schwarz, für Lidar Sensor im Neato / Vorwerk Kobold Staubsaugroboter VR200 und VR300 * LIDAR Gummiriemen Nitril NBR Riemen, Härte 70 / NBR 70 hardness nitrile belt Bitte Abbildungen beachten ! PASSEND FÜR / KOMPATIBEL MIT: * Vorwerk Kobold VR-200 VR200 * Vorwerk Kobold Folletto VR-300 * Neato BotVac Connected D3 905-0321, D4 D401 D405,945-0343, D450, D5 D502 905-0386, D6 D602 D650 945-0345, D7 945-0296, D8 , D9 mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
|
Art.Nr.: 36013 |
|
|
Art.Nr.: 36013 |
Saugeinlass / Verschluss für den Dust Bin / Staubbehälter bei der Neato BotVac Serie PASSEND FÜR / KOMPATIBEL MIT: * Neato BotVac D65 / D75 / D85 etc * Neato BotVac Connected D3 / D4 / D5 / D6 / D7 mehr Infos...>>
|
|
|
mehr als 10 sofort versandbereit / abholbar, Lieferzeit DE ca. 1-2 Werktage
|
|
|
|
|
angezeigte Produkte: 1-30 (von 139) |
|
|
|